13.1.17. Removal and installation of limiters of opening of side doors

Details of installation and design of the limiter of opening of a side door

1 — the Bolt
2 — the Holder of a sealing element
3 — the Sealing element

4 — the Basic arm
5 — the Limiter
6 — the Nut


 PERFORMANCE ORDER

  1. The corresponding illustrative material is presented on an illustration to which all references which are found in the text belong.
  2. Remove an internal upholstery of the corresponding door and separate a first line of a sealing film (see the Section Removal and installation of panels of an internal upholstery of door assemblies).
  3. Turn out the screw (1) of fastening of the limiter (5) to corresponding (And or In) to a rack, - try not to damage a paint and varnish covering.
  4. Holding the limiter (5), release nuts (6) of fastening it to door assembly.
  5. Remove the limiter, having released it from a service window in a doorframe.

Release a rubber sealant of the directing trench of a window regulator from a clamp and shift it lengthways on a limiter level.

  1. Installation is made upside-down, - track correctness of landing of a sealant of the directing window regulator trench, grease the screw (1) of the limiter to a rack before a vvorachivaniye with glue, in case of need replace the damaged sealing film of door assembly.