6.1.9. Removal and installation of assembly of the fuel pump with the fuel reserve sensor

Details of installation of assembly of the fuel pump with the fuel reserve sensor (all models)

And — Arms of a frame of a back seat

Arrow — the Contact socket of an electrical wiring of the fuel pump


 PERFORMANCE ORDER

  1. Details of installation of assembly of the fuel pump are shown on an illustration to which all references which are found in the text belong.
  2. Empty the fuel tank (see the Section Depletion of the Fuel Tank).
  3. Having performed procedures of paragraphs with 2 on 6 Sections Depletion of the Fuel Tank, uncover (84) windows of access to assembly of the fuel pump / sensor of a reserve of fuel.
  4. Disunite the contact socket (shooter) of an electrical wiring of the fuel pump.
  5. Disconnect from pump assembly of the line of giving (90/12) and return (90/11) of fuel, at the corresponding complete set disconnect also a fuel-supply line of a stationary heater (90/13), - try not to allow bending of fuel-supply lines.

If the stationary heater is not established, do not make attempts to turn out the screw of the connecting union.

  1. By means of a suitable key release a ring nut (89).

The ring nut is subject to replacement without fail.

  1. Accurately take assembly of the fuel pump / sensor of a reserve of fuel (M3/B4) from a gasoline tank, - try not to bend the sensor float lever.

The pump with the sensor are united in the uniform, not subject to dismantling knot!

  1. Installation is made upside-down, - oil a sealing element (89/2).