6.1.6. Removal and installation of components of an inlet air path

Details of installation of an air inlet on models 163.136 (the series 111 engine)

4/16 — the Air inlet
Arrow — the Clamp

Details of installation of an air inlet on models 163.136 (the series 111 engine) are shown on an illustration, - previously remove a front grille (see the Head Kuzov).

Air cleaner

Details of installation of the air cleaner on models 163.136 (the series 111 engine)

Shooters — Rubber pillows

Details of installation of the air cleaner on models 163.136 (the series 111 engine) are shown on an illustration, - do not forget to release a hose of a cooling path from a guide on the air cleaner case.

Sensor of measurement of mass of air (MAF)

Details of installation of the MAF sensor on models 163.136 (the series 111 engine)

B2/5 — the MAF Sensor

Details of installation of the MAF sensor on models 163.136 (the series 111 engine) are shown on an illustration, - do not forget to replace a sealing ring.

Bypass air cleaner sleeve

Details of installation of a bypass air sleeve on models 163.136

4/5 — Bypass an air cleaner sleeve
B17 — the Sensor of air temperature, given to salon

Shooters — Fixing clamps

Details of installation of a bypass air sleeve on models 163.136

Shooters — Fixing clamps

Details of installation of a bypass air sleeve on models 163.136

Shooters — Fixing clamps

Details of installation of a bypass sleeve of the air cleaner on models 163.136 (the series 111 engine) are shown on illustrations.

Model 163.154/157

Details of installation of components of an inlet air path on models 163.154/157 (series 112 engines)

1/2 — the Right line of ventilation of a case
2 — the Air cleaner
2/1 — Rezonatornaya the camera

2/2 — the Air duct
2/3 — the Bolt
B2/45 — the MAF Sensor

Details of installation of components of an inlet air path on models 163.154/157 (series 112 engines) are shown on an illustration. Before removal of an air sleeve (2/2) it is necessary to disconnect a cable of the drive of an electronic accelerator (shooter), - wring out the screw-driver a lock uvula of a clamp of fastening of an air sleeve (2/2) to the actuation mechanism of an electronic accelerator down.

Model 163.172/174/175

Details of installation of components of an inlet air path on models 163.172/174/175 (series 113 engines)

1 — the Cover of a broad tank of the cooling system
2 — the Overflow tube
3 — the Line of a cooling path
4 — the Line of a cooling path
5 — the Line of a cooling path
6 — the Contact socket
7 — the Broad tank
8 — the Vacuum hose of system of ventilation of a case

9 — the Air duct
9/1 — the Bolt
10 — the Air cleaner
11 — an air duct Clamp
12 — Rezonatornaya the camera
13 — the Contact socket of an electrical wiring of the MAF sensor
B2/5 — the MAF Sensor


 PERFORMANCE ORDER

  1. Details of installation of components of an inlet air path on models 163.172/174/175 (series 113 engines) are shown on an illustration to which all references which are found in the text belong.
  2. Having opened a cover (1), dump excessive pressure in a broad tank of the cooling system (7).
  3. Disconnect from a broad tank (7) an overflow tube (2).
  4. Disconnect (7) lines (3, 4 and 5) of a cooling path from a broad tank.
  5. Remove a broad tank (7).
  6. Disunite the contact socket (6) of the MAF (B2/5) sensor.
  7. Disconnect a vacuum hose (8) of system of ventilation of a case.
  8. Having turned out a bolt (9/1), separate an air sleeve (9) from a cover of a head of cylinders.
  9. Remove the MAF (B2/5) sensor from the air cleaner (10).
  10. Wring out the screw-driver the blocking mechanism (11) of an air sleeve down.
  11. Remove the rezonatorny camera (12).
  12. Remove a sleeve (9) assembled with the MAF (B2/5) sensor.
  13. Installation is made upside-down.