8.2. Removal and installation of the lever of switching of RKPP 717.461

Details of installation of the lever of gear shifting of RKPP 717.461

1-2 — the Intermediate lever of switching 1-2
3-4 — the Intermediate lever of switching 3-4

5-R — the Intermediate lever of switching 5-R

Details of installation of the lever of gear shifting of RKPP 717.461

Details of installation of the lever of gear shifting of RKPP 717.461

2 — Fixing bolts

S16/2 — the Sensor switch of fires of a backing


 PERFORMANCE ORDER

  1. Details of installation of the lever of switching of RKPP 717.461 (model ML 230) are shown on illustrations to which all references which are found in the text belong.
  2. Include neutral transfer.
  3. Disconnect intermediate levers of switching (1-2, 3-4, 5-R).
  4. Uncover the switching lever basis.
  5. Disconnect an electrical wiring from the sensor switch of fires of a backing (S16/2).
  6. Release from clamps and take aside a cable of the drive of the parking brake.
  7. Release bolts (2) and remove the bearing arm.
  8. Installation is made upside-down. In conclusion make adjustment of the drive (see the Section Search of Malfunctions - the general information).