6.3.9. Removal and installation of the broad tank of accumulation of fuel evaporations, - appropriately completed model 163.113 / 154 / 128
Details of the broad tank of accumulation of fuel evaporations on models 163.113, 163.154 and 163.128 of the corresponding complete set
Details of the broad tank of accumulation of fuel evaporations on models 163.113, 163.154 and 163.128 of the corresponding complete set
|
|
- Details of installation of the broad tank of accumulation of fuel evaporations on models of the corresponding complete set are shown on illustrations to which all references which are found in the text belong.
- Uncover a jellied mouth of the fuel tank (1).
- Transfer a loop (3) to a closed position.
- Turn out bolts (4).
- Remove panels of finishing of a rack of Page.
- Separate (6) ventilating lines (5) from a jellied mouth.
- Turn out bolts (7) of an arm (8) of a jellied mouth (5).
- Remove from a body element a clamp (9).
- Turn out a fixing bolt (10) and delay the broad tank (11) forward.
- Weaken landing of a rubber sealing element (12) of a mouth (6) on a car floor.
- Remove a jellied mouth assembled with a basic arm from the Page rack.
- Take from a rack About the broad tank (11).
- Installation is made upside-down, - at installation of a clamp (9) track that the electrical wiring passed under an arm (8), a carving part of a bolt (2) fastenings of a loop of a cover before a vvorachivaniye needs to be greased with the fixing sealant. Track correctness of adjustment of a cover of a jellied mouth (1).
|
|