12.3.8. Removal installation of entrance knot of the steering mechanism
Details of installation of entrance knot (25) of the steering mechanism (23)
|
|
- Details of installation of entrance knot of the steering mechanism are shown on сопр. an illustration to which all references which are found in the text belong.
- Bring forward wheels into rectilinear situation and record a steering wheel by means of special adaptation.
- At the corresponding complete set remove the right thermofilter (105d) of system of production of the fulfilled gases.
- Give a nut (25e) and a bolt of fastening of entrance knot (25) of the steering mechanism.
- Release a nut (25d) of the bolt connection of an entrance shaft of knot (25) with the lower shaft of a steering column (80a).
- Having accurately pulled up, release entrance knot (25) from assembly of the operating valve of the steering mechanism, - at all do not use force, - in case of need slightly unclench the lock the screw-driver!
- At the corresponding complete set remove a casing (25f) of entrance knot.
- Installation is made upside-down, - at installation of entrance knot the lath has to be in neutral (central) situation.
|
|